Attention: Cablematic Dos Mil S.L.U. uses cookies (own and third parties) on this website. For more information on cookies, see our cookies and privacy policy. If you continue using our website, you agree to our use of cookies.
Understood, hide this message More information
2035146931
Free Shipping
Login
New customer
HL56

HDMI Extender UTP Cable 60m Infrared 1080p 1xUTP

Product ID HL56

Technical summary

  • HDMI signal extender that allows you to extend the total cable length from source (video source) to the destination (projector or flat screen) usinga UTP cable of Cat.6 or Cat.7.
  • Allows an approximate distance of 60 m to 1080p using category 6 or higher cable.
  • Two modules of reduced size (98 x 66 x 25 mm) are supplied.
  • The transmitter module has a female HDMI input connector, an HDMI female output connector, and an IR-OUT connector for the connection of the infrared emitter.
  • The receiver module has a female HDMI connectoroutput, and IR-IN connector for the connection of the infrared receiver.
More info

RJ45

FullHD 1080p

HDCP

HDMI

VGA

Product available. Delivery time 1-3 days. 2 years warranty. 14 days return period.
  • Description
  • Sizes
  • Related
  • Tech FAQs

Extender HDMI or what is the same a device that allows longer distances of HDMI cable without losing the signal. The HDMI signal is transmitted through a category 6 or category 7 UTP cable. Two modules are supplied with a female HDMI connector and a female RJ45 connector. The UTP cable allows the transmission and distribution of the HDMI signal at higher distances and also its installation is easier and cheaper.mica. Two modules are supplied, the transmitter (sender) and the receiver (receiver) that are interconnected between them using a UTP cable. Model with infrared signal transmission support for remote control of the TV.

Specifications

  • HDMI signal extender that allows you to extend the total cable length from source (video source) to the destination (projector or flat screen) usinga UTP cable of Cat.6 or Cat.7.
  • Allows an approximate distance of 60 m to 1080p using category 6 or higher cable.
  • Two modules of reduced size (98 x 66 x 25 mm) are supplied.
  • The transmitter module has a female HDMI input connector, an HDMI female output connector, and an IR-OUT connector for the connection of the infrared emitter.
  • The receiver module has a female HDMI connectoroutput, and IR-IN connector for the connection of the infrared receiver.
  • Each module has a female RJ45 connector where they are interconnected using a UTP cable.
  • Supported resolution: 1920x1200 and 1080p.
  • Compatible with HDMI 1.3, 1.2a, HDCP 1.0 and HDCP 1.1.
  • Supported VGA video formats: 640x480, 800x600, 1024x768 and 1920x1200.
  • Supported DTV/HDTV video formats: 480i, 576i, 480p, 576p, 720p, 1080i and 1080p.
  • Working frequency: 2.25 Gbps.
  • Each module requires 5 VDC power supply (including two sources).
  • The UTP cable uses the TIA-568B crimp standard.
  • Consumption of each module: 2W.
  • LINK indicator LEDs. RESET pushbuttons.
  • A transmitter and an infrared (IR) receiver are supplied for connection to the modules. Allows the transmission of the signalto the remote control of the TV.


Brand

BeMatik
Sizes
Weight: 0.49 Kg.
Product measures:
Width: 7.2 x Depth: 6.7 x Height: 2.5 cm.
Number of packages: 1
Package sizes:
20.2 x 14.8 x 8 cm.Package volume: 2391.680 cm3.
This product is not available with different sizes
Color unspecified

[!] Weights, sizes, colors and shapes are only approximate and may differ from those represented, although the functionality of the product never differ with those specified

Technical documentation on
Tech FAQs

Do you have any other question about this product?

oppsss! to make a question you must be logged, if you' are not a customer yet, you can open an account in less than 1 minute, it's totally free.
Technical terms used
  1. 1080p

  2. Categories network cables

  3. Gbps

  4. HDCP

  5. HDMI

  6. HDTV

  7. RJ45

  8. Types of network cables (UTP, FTP, STP)

  9. VDC

  10. VGA

1080p

1080p is an alternative name for the maximum resolution used in high definition television (HDTV). The number 1080 represents 1080 lines of vertical display resolution, while the letter p stands for progressive scan and non-interlaced.

Fuente de la información sobre 1080p: http://es.wikipedia.org/wiki/1080p

Categories network cables

Depending on the quality and type, network cables are classified into categories that help us know the characteristics of them.

The categories of network cables most commonly used are:

- Category 5
- Category 5e
- Category 6
- Category 6
- Category 7

As can be seen, category 5e (enhanced or improved) and category 6A (Augmented), are an improvement of categories 5and 6, respectively, which it has improved the top speed and bandwidth.

The higher the category, the higher the speed of maximum data, the maximum 100 meters distance as its standard.

You can see a table which shows the 5 categories, where V is the maximum velocity, D is the maximum and MHz frequency which can work away.


Categories network cables


Gbps

Gbps (Gb/s, Gbit/s) is the speed with which information is transmitted. It is normally used to measure the speed information in the ADSL/fiber addresses transmitted.

  • 1 Gb/s is equivalent to 1,000,000,000 b/s.
  • 1 Gb/s is equivalent to 1000000 kb/s.
  • 1Gb/s equals 1000 Mb/s.


HDCP

HDCP (acronym for high-bandwidth digital content protection in English, that means protection of digital content of high bandwidth) is a specification developed by Intel to control the content of digital audio and video that is transmitted through DisplayPort, DVI connections, HDMI, Gigabit Video Interface (GVIF), or Unified Display Interface (UDI). The specification is proprietary, and their implementations must be licenciadas, of which Digital Content Protection is responsible. It is a type of digital rights management.


HDMI

The acronym "HDMI" stands for "High Definition Multimedia Interface".

The HDMI interface allows transmission of video and audio between devices, supporting video resolutions 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 1440p, 1600p.

Different HDMI versions

HDMi 1.0
- December 2002.
- Maximum transfer of 4.9 Gbit/s.
- Supports up to 165 Mpixels/s video mode (1080p or UXGA 60Hz) and 8-channel/192 kHz/24-bit audio mode.

HDMI 1.2
- August 2005.
- Added support for One Bit Audio, used on Super Audio CDs, up to 8 channels.
- Availability HDMI Type A connectors for PC.

HDMI 1.3
- June 2006
- Bandwidth 340 MHz.
- Data rate of 10.2 Gbit/s.
- Dolby TrueHD and DTS-HD,

HDMI 1.4
- Send video and audio HD
- Data and 3D video.
- FullHD to XHD (eXtended High Definition) up to 4096 × 2160 pixels (24 frames per second) or 3840 × 2160 (30 fps).
- Audio Return Channel that will need fewer cables to have a surround sound system connected to the TV.
- Built-in Ethernet connection cable with speeds up to 100 Mbit/s own.

HDMi 2.0
- September 2013
- Bandwidth of up to 18 Gbit/s
- 4K @ 50/60 (2160p) video
- Up to 32 audio channels to a multi-dimensional immersive experience
- Up frequency 1536kHz for maximum audio fidelity sound
- Simultaneous Delivery 2 streaming video to multiple users on the same screen
- Streaming audio up to 4 users
- Support theater angle 21:9 radio
- Dynamic synchronization of video and audio in streaming
- Extensions of CEC commands to control multiple devices from a single point.


Type HDMI

Type A (picture 1): It is the standard connector used in almost all devices.
Type B (picture 2): A connector rarely used.
Type C (picture 3): A connector widely used in tablets, smartphones and other devices.
Type D (picture 4): A connector used in smartphones.
Type E (picture 5): IA connector used for vehicles connectivity.

HDMI


HDTV

The meaning would be HDTV. It is used to indicate that the device is compatible with high definition. For high definition they have created three technical standards. ATSC, DVB and ISDB-T. Since 2005 the possibility of assigning HD Ready label as a kind of obligation to define the devices that have more than 720 lines (720p, 1080i at 50 or 60 Hz) was assessed.


RJ45

When we talk about RJ45 ("Registered Jack" 45) we refer to a telecommunications network interface for wired connection of voice and data equipment.

This connector has 8 pins or connections and may have a specific category depending on the data transfer speed and bandwidth (category 5e, 6, etc.)

The common application is their use in Ethernet network cables under TIA/EIA-568-B standard that defines the arrangement of pins (pinout), but can also be used for other applications.

- Direct pin diagram:

EIA-568A
Pin No.1: WHITE-GREEN
Pin No.2: GREEN
Pin No.3: WHITE-ORANGE
Pin No.4: BLUE
Pin No.5: WHITE-BLUE
Pin No.6: ORANGE
Pin No.7: WHITE-BROWN
Pin No.8: BROWN

EIA-568B
Pin No.1: WHITE-ORANGE
Pin No.2: ORANGE
Pin No.3: WHITE-GREEN
Pin No.4: BLUE
Pin No.5: WHITE-BLUE
Pin No.6: GREEN
Pin No.7: WHITE-BROWN
Pin No.8: BROWN

- Schematic of crossed pins:

The crossover cable has one end with EIA-568A scheme and the other one with EIA-568B.

RJ45


Types of network cables (UTP, FTP, STP)

UTP cable is standard twisted pair is referred by its acronym UTP (Unshiedld Twiested Pair/Unshielded Twisted Pair). The major advantages of this cable are its low cost and ease of handling. Its main disadvantages are a higher error rate compared to other cable types and their limitations to work at high distances without regeneration. FTP is a type of cable caracteriza that each twisted pair is uniformly during creation. A comprehensive screening of all pairs is performed by a apantallante outer sheet. This technique allows to have similar characteristics to the shielded cable. STP is characterized by that each pair is covered with a metal mesh, in the same way that the coaxial cables, and the set of pairs is coated with a sheet apantallante. Referenced frequently with their acronym STP (Shield Twisted Pair/Shielded Twisted Pair)

Types of network cables (UTP, FTP, STP)


VDC

VDC would be the abbreviation for Volt Direct Current which translated would volts direct current. The idea of ??this type is unidirectional current to the load. Direct current is normally produced by batteries, thermocouples, solar cells and a dynamo electric machine type. The direct current can flow in conductors such as wires, but may also flow through semiconductors, insulators ... In the image: 1 - current per pulse 2 - Direct Current (DC) 3 - Alternating Current (AC) 4 - Variable Current

VDC


VGA

The term VGA (Video Graphics Array or Video Graphics Adapter) is a graphics display system for PCs developed by IBM. VGA has become one of the standards for the PC image. In text mode, VGA provides a resolution of 720 by 400 pixels. In graphics mode, the resolution is either 640 by 480 (with 16 colors) or 320 by 200 (with 256 colors). The color palette is 262,144.Unlike earlier graphic standards for PCs - MDA, CGA, EGA and VGA - uses analog signals rather than digital signals. Since its introduction in 1987, several other standards have been developed that offer greater resolution and more colors (SVGA, XGA ...), but VGA remains the denominator used. All personal computers manufactured today still have support VGA, and possibly some other more advanced connection.

VGA


Top
Cablematic Dos Mil SLU, Santander 61, 08020 Barcelona (Spain) - Hours: 08:00 to 17:00 Monday to Friday
Prices exclude VAT unless otherwise stated. Shipping not included
Phone: 2035146931 info@cablematic.com VAT number: GB263929178
Shop design by deDavid.com