03/28/2024 11:54 a.m.
https://cablematic.com/en/products/network-cable-tester-sc6106-CT005/
Network Cable Tester SC6106
REF: CT005
Specifications
  • The type of cable to be tested (UTP, FTP, TEL and BNC).
  • The identifier number of the remote terminal.
  • The detected error code (OPEN, SHORT and WRONG).
  • The pin-out of the cable checked. For this it has two filtersas of 9 numbers where each row corresponds to a cable and each number to a pin.
play_button Watch video
More info
PVP
40.53
Price including VAT: 40.53
PVD
36.55
Shipping costs: 30,75 *
GB-SE1 1ES
Delivery times are approximate. Cablematic is not responsible for delays.
2 years
warranty
14 days
returns
100%
safe

In stock
Available more than 10

More info
Specifications
  • The type of cable to be tested (UTP, FTP, TEL and BNC).
  • The identifier number of the remote terminal.
  • The detected error code (OPEN, SHORT and WRONG).
  • The pin-out of the cable checked. For this it has two filtersas of 9 numbers where each row corresponds to a cable and each number to a pin.

Keywords

Did not find what you were looking for? These topic could help you

More info

Cable tester with LCD viewer that shows the results obtained in a clear and complete way. It allows the verification of UTP, FTP, TEL and BNC cables. In the LCD viewer it shows:
  • The type of cable to be tested (UTP, FTP, TEL and BNC).
  • The identifier number of the remote terminal.
  • The detected error code (OPEN, SHORT and WRONG).
  • The pin-out of the cable checked. For this it has two filtersas of 9 numbers where each row corresponds to a cable and each number to a pin.


    The tester has two female RJ45 connectors (Main and Loopback) to check cables not installed (hoses). In addition, a terminator is supplied that emits acoustic signals to check cables already installed. It also has 2 control buttons. For checking of coaxial cables are suppliedtwo adapters of RJ45-Male to BNC. To check any type of cable, two adapters are supplied from RJ45-Male to clamps. It works with 4 batteries of type 1.5V AA. Professional performance tester at a very affordable price.
    • Gross Weight: 430 g
    • Product size (width x depth x height): 12.4 x 6.7 x 2.4 cm
    • Number of packages: 1
    • Packages size: 21.0 x 15.7 x 6.4 cm
    • Master-pack: 10

    Videos

    play_button Watch video

    Technical terms

    • Types of network cables (UTP, FTP, STP)
    • BNC
    • RJ45
    • Categories network cables
    • Types of batteries
    Types of network cables (UTP, FTP, STP)
    UTP cable is standard twisted pair is referred by its acronym UTP (Unshiedld Twiested Pair/Unshielded Twisted Pair). The major advantages of this cable are its low cost and ease of handling. Its main disadvantages are a higher error rate compared to other cable types and their limitations to work at high distances without regeneration. FTP is a type of cable caracteriza that each twisted pair is uniformly during creation. A comprehensive screening of all pairs is performed by a apantallante outer sheet. This technique allows to have similar characteristics to the shielded cable. STP is characterized by that each pair is covered with a metal mesh, in the same way that the coaxial cables, and the set of pairs is coated with a sheet apantallante. Referenced frequently with their acronym STP (Shield Twisted Pair/Shielded Twisted Pair)

    Do you have any question about this product?